Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsqueue-setqueue-setUse the queue-set interface configuration command on the switch stack or on a standalone switch to mapa port to a queue-set. Use the no form of this command to return to the default setting.queue-set qset-idno queue-set qset-idSyntax Descriptionqset-idID of the queue-set. Each port belongs to a queue-set, which defines all thecharacteristics of the four egress queues per port. The range is 1 to 2.Defaults The queue-set ID is 1.Command ModesInterface configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesFor information about automatic generation of the queue-set ID with the auto qos voip command, seethe “Usage Guidelines” section for the auto qos voip command.Examples This example shows how to map a port to queue-set 2:Switch(config)# interface gigabitethernet2/0/1Switch(config-if)# queue-set 2You can verify your settings by entering the show mls qos interface [interface-id] buffers privilegedEXEC command.Related CommandsCommandmls qos queue-set output buffersmls qos queue-set output thresholdshow mls qos interface buffersDescriptionAllocates buffers to a queue-set.Configures the weighted tail-drop (WTD) thresholds,guarantees the availability of buffers, and configures themaximum memory allocation to a queue-set.Displays quality of service (QoS) information.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-455