Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsboot systemboot systemUse the boot system global configuration command on the switch stack or on a standalone switch tospecify the Cisco IOS image to load during the next boot cycle. Use the no form of this command toreturn to the default setting.boot system {filesystem:/file-url ...| switch {number | all}}no boot systemno boot system switch {number | all}Syntax Descriptionfilesystem:/file-urlswitchnumberallAlias for a flash file system. Use flash: for the system board flash device.The path (directory) and name of a bootable image. Separate image nameswith a semicolon.Specify the switches on which the Cisco IOS image is loaded.This keyword is supported only on on stacking-capable switches.Specify a stack member. (Specify one stack member only.)This keyword is supported only on on stacking-capable switches.Specify all stack members.This keyword is supported only on on stacking-capable switches.DefaultsThe switch attempts to automatically boot up the system by using information in the BOOT environmentvariable. If this variable is not set, the switch attempts to load and execute the first executable image itcan by performing a recursive, depth-first search throughout the flash file system. In a depth-first searchof a directory, each encountered subdirectory is completely searched before continuing the search in theoriginal directory.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesFilenames and directory names are case sensitive.If you enter the boot system filesystem:/file-url command on the stack master, the specified softwareimage is loaded only on the stack master during the next boot cycle.On the stack master, use the boot system switch number command to specify that the software image isloaded on the specified stack member during the next boot cycle. Use the boot system switch allcommand to specify that the software image is loaded on all the stack members during the next bootcycle.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-75