Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsdiagnostic schedulediagnostic scheduleUse the diagnostic schedule global configuration command to configure the diagnostic test schedule. Usethe no form of this command to remove the schedule.diagnostic schedule switch number test {name | test-id | test-id-range | all | basic | non-disruptive}{daily hh:mm | on mm dd yyyy hh:mm | weekly day-of-week hh:mm}no diagnostic schedule switch number test {name | test-id | test-id-range | all | basic |non-disruptive} {daily hh:mm | on mm dd yyyy hh:mm | weekly day-of-week hh:mm}Syntax Descriptionswitch numbertestnametest-idtest-id-rangeallbasicnon-disruptivedaily hh:mmon mm dd yyyyhh:mmweekly day-of-weekhh:mmSpecify the switch number, which is the stack member number. If theswitch is a standalone switch, the switch number is 1. If the switch is in astack, the range is 1 to 9, depending on the switch member numbers in thestack.This keyword is supported only on on stacking-capable switches.Specify the tests to be scheduled.Specify the name of the test. For more information, see the “UsageGuidelines” section.Specify the ID number of the test. The range is from 1 to 7. For moreinformation, see the “Usage Guidelines” section.Specify more than one test with the range of test ID numbers. For moreinformation, see the “Usage Guidelines” section.Specify all of the diagnostic tests.Specify the basic on-demand diagnostic tests.Specify the nondisruptive health-monitoring tests.Specify the daily scheduling of the diagnostic tests. For formattinginformation, see the “Usage Guidelines” section.Specify the scheduling of the diagnostic tests on a specific day and time.For formatting information, see the “Usage Guidelines” section.Specify the weekly scheduling of the diagnostic tests. For formattinginformation, see the “Usage Guidelines” section.DefaultsThis command has no default settings.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-141