Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsnetwork-policy profile (network-policy configuration)network-policy profile (network-policy configuration)Use the network-policy profile configuration mode command to configure the network-policy profilecreated by using the network-policy profile global configuration command. Use the no form of thiscommand without additional parameters to delete a profile. Use the no form with parameters to changeits configured attributes.network-policy profile profile number {voice | voice-signaling} vlan [vlan-id {cos cvalue | dscpdvalue}] | [[dot1p {cos cvalue | dscp dvalue}] | none | untagged]no network-policy profile profile number {voice | voice-signaling} vlan [vlan-id | {cos cvalue} |{dscp dvalue}] | [[dot1p {cos cvalue} | {dscp dvalue}] | none | untagged]Syntax DescriptionvoiceSpecify the voice application type.voice-signalingSpecify the voice-signaling application type.vlanSpecify the native VLAN for voice traffic.vlan-id (Optional) Specify the VLAN for voice traffic. The range is 1 to 4094.cos cvalue(Optional) Specify the Layer 2 priority class of service (CoS) for theconfigured VLAN. The range is 0 to 7; the default is 0.dscp dvalue(Optional) Specify the differentiated services code point (DSCP) valuefor the configured VLAN. The range is 0 to 63; the default is 0.dot1p(Optional) Configure the telephone to use IEEE 802.1p priority taggingand to use VLAN 0 (the native VLAN).none(Optional) Do not instruct the IP telephone about the voice VLAN. Thetelephone uses the configuration from the telephone key pad.untagged(Optional) Configure the telephone to send untagged voice traffic. Thisis the default for the telephone.DefaultsNo network policies are defined.Command ModesNetwork-policy configurationCommand HistoryRelease12.2(50)SEModificationThis command was introduced.Usage GuidelinesUse the network-policy profile command to configure the attributes of a network-policy profile.The voice application type is for dedicated IP telephones and similar devices that support interactivevoice services. These devices are typically deployed on a separate VLAN for ease of deployment andenhanced security through isolation from data applications.The voice-signaling application type is for network topologies that require a different policy for voicesignaling than for voice media. This application type should not be advertised if all the same networkpolicies apply as those advertised in the voice policy TLV.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-403