Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsip dhcp snooping databaseip dhcp snooping databaseUse the ip dhcp snooping database global configuration command on the switch stack or on astandalone switch to configure the DHCP snooping binding database agent. Use the no form of thiscommand to disable the agent, to reset the timeout value, or to reset the write-delay value.ip dhcp snooping database {{flash[number]:/filename | ftp://user:password@host/filename |http://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tar |rcp://user@host/filename | tftp://host/filename} | timeout seconds | write-delay seconds}no ip dhcp snooping database [timeout | write-delay]Syntax Descriptionflash[number]:/filenameftp://user:password@host/filenamehttp://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tarrcp://user@host/filenametftp://host/filenametimeout secondswrite-delay secondsSpecify that the database agent or the binding file is in the flashmemory.(Optional) Use the number parameter to specify the stackmember number of the stack master. The range for number is 1to 9.Specify that the database agent or the binding file is on an FTPserver.Specify that the database agent or the binding file is on an FTPserver.Specify that the database agent or the binding file is on aRemote Control Protocol (RCP) server.Specify that the database agent or the binding file is on a TFTPserver.Specify (in seconds) how long to wait for the database transferprocess to finish before stopping.The default is 300 seconds. The range is 0 to 86400. Use 0 todefine an infinite duration, which means to continue trying thetransfer indefinitely.Specify (in seconds) the duration for which the transfer shouldbe delayed after the binding database changes. The defaultis 300 seconds. The range is 15 to 86400.DefaultsThe URL for the database agent or binding file is not defined.The timeout value is 300 seconds (5 minutes).The write-delay value is 300 seconds (5 minutes).Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-235