Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandspermit (ARP access-list configuration)Command HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesYou can add permit clauses to forward ARP packets based on some matching criteria.ExamplesThis example shows how to define an ARP access list and to permit both ARP requests and ARPresponses from a host with an IP address of 1.1.1.1 and a MAC address of 0000.0000.abcd:Switch(config)# arp access-list static-hostsSwitch(config-arp-nacl)# permit ip host 1.1.1.1 mac host 0000.0000.abcdSwitch(config-arp-nacl)# endYou can verify your settings by entering the show arp access-list privileged EXEC command.Related CommandsCommandarp access-listdeny (ARP access-listconfiguration)ip arp inspection filter vlanshow arp access-listDescriptionDefines an ARP access control list (ACL).Denies an ARP packet based on matches against the DHCP bindings.Permits ARP requests and responses from a host configured with astatic IP address.Displays detailed information about ARP access lists.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-417