InterForm Manual - System & Method

Step 12. Defining the Copy Management
W e will now add the text COPY on “page two" copies only. To do this we will first have to
enable and configure the copy management.
This is set in the General folder of the overlay:
W e set the primary number of copies to 2under the ‘Primary tab’:
Step 13. Defining the COPY Symbol as Watermark
The intention of the copy sign is to place this information as a watermark in the address field.
We can therefore place the text element between the two Ink changes we made for the logo
watermark, and thereby exploit the same raster pattern definition.
W e click the first Ink element, then the text element on the right:
Then we click in the Result view in the bottom left of the address frame. This inserts the text
element as below. W e type the text ‘COPY’:
For the font out line we can select one from the existing list. The largest font currently
assigned to the system is font ID 2103 with point size 24 (see font list on page 419).
W e can now choose to use this font, or we can assign a new font ID a larger font.
®
If you feel comfortable enough with InterForm400 by now, you should try to assign the large
font, Go to 80. Administration Menu (either in this session by exiting with F3, or by using
another session). Go to section 4. Work with fonts and select 1.Description of additional
fonts. Now perform the steps described in the Example of defining a resident Printer Font
on page 304). Then select ‘File’ and ‘Reload fonts and colors’ in the designer to update the
font list.
The text element is to be shown only on copy 2. This is set under the ‘Page management’ tab:
InterForm A/S 101