InterForm Manual - System & Method

You can see that the element is included on the primary copy 2 only by the indication ‘C:P2-2'
in the element list.
Step 14. Defining the Relatively Positioned Sub-form
We want to add a condition to the output so that a special text ´*Note: Special offer!’ is added
to the right of the detail lines containing the PDF Security module.
This will use one of the more advanced features of the system, generally known as “nested
overlays”. To add the call to the other conditioned overlay we first click ‘Bottom’ in the element
list to add it as the very last element and the click the ‘conditional element’ on the left:
Now the call to a conditioned overlay is inserted and we can now mark the spooled file line to
be considered in the Spool view. We drag over the lines 30-42 with the left mouse button
pressed to mark the lines and drag over the positions 8-19 while holding down the right
mouse button to mark the positions for the condition. As the compare text we write ‘PDF
security’ as written in some lines (case sensitive).
We want to create another overlay to call, so now we create it by pressing this icon on the
conditioned element:
Then we are prompted for the name of the new overlay and we type OFFER and press Save.
W e can now edit the OFFER overlay by clicking this icon on the conditioned element:
Now we insert a new Text element to the right of the frame as high as possible (as close to the
PDF security line as possible - we will move it up later):
Now we go back to the main overlay (IF400DEMO) by pressing the ‘Close overlay’ icon:
Back in the main overlay we can now edit the conditioned element to reposition it correctly in
the vertical direction. We change the vertical placement to minus 0,060:
102 User’s Manual for InterForm400 ®