InterForm Manual - System & Method

Overlay Element Selection Filters
When entering a sequence number and you press Field Exit the following entry screen will
appear:
Design InterForm 400 overlay APF300D
Overlay name: IF400DEMO Overlay text: IF400DEMO
Seqnbr. Type Overlay definition
Seqnbr. Type *=Suspend Page control
1,0 _ _ _
1 = Frame 2 = Horizontal BLANK = all pages
3 = Vertical 4 = Line 1 = first page only
5 = Text 6 = Print-info 2 = page 2 and succ.
7 = Ink 8 = Tabulator 9 = last page only
9 = Remap window I = Image
? = If .. then F = PCL-file
G = HP-GL/2 file S = Suboverlay
* = Comment
F3=Exit F12=Cancel F18=View Spool entry
Suspend: Next to the type you can enter an asterix (*) if you want to suspend/disable this
design element. This is an alternative to deleting the element if you temporarily want to remove
this element. The asterix is also shown when displaying the design element list.
The right side of the screen will contain entries for Copy management or Page control
depending on the value for Copy management in the global settings of the overlay
Page Control
The Page Control fields are used to assign this specific sequence line to all printed pages or
to selected pages only.
Seqnbr. Type Page control
1,0 _ 1 = Frame 2 = Horizontal _ BLANK = all pages
3 = Vertical 4 = Line 1 = first page only
5 = Text 6 = Print-info 2 = page 2 and succ.
7 = Ink 8 = Tabulator 9 = last page only
9 = Remap window I = Image
? = If .. then F = PCL-file
G = HP-GL/2 file S = Suboverlay
* = Comment
F3=Exit F12=Cancel F18=View Spool entry
� WARNING �
Do not use page control in conditioned overlays. (Overlays called by an If..Then line).
If S or L is filled in for Duplex Print for the global settings of the overlay the Page Control will
be extended with a possibility of entering if page numbering should be made on odd or even
pages only:
InterForm A/S 65