InterForm Manual - System & Method

For charts with type *LINE the screen looks like this:
Change Observation set CHS110D
Chart . . . . . . . . . : SAMPLELINE
Type . . . . . . . . . . : *LINE
Seq number . . . . . . . : ___
Observation set . . . . . ___
Text . . . . . . . . . . . _______________________________________
Text font . . . . . . . . ____
Text font color . . . . . ___
Use Y1/Y2-axis . . . . . . _ 1=Y1, 2=Y2
Line type . . . . . . . . _ 1-9
Line width . . . . . . . . __ Dots
Point marker . . . . . . . _ C, C1-C8
Color . . . . . . . . . . ___
F3=Exit F4=Prompt F12=Cancel
Seq number: The sequence number of this observation set. The sequence number is
used for in which sequence this observation set is shown in relation to
other observation sets.
Observation set: Name of this observation set.
Text: Description of the observation set. Printed below the chart.
Text font/color: Font and color used for the text above.
Use Y1/Y2-axis: Links the observation set to either the Y1- or Y2-axis.
Line type: For charts with the type *LINE this decides the type of line representing this
observation set. The various types can be seen above under ’Define layout
of the Y1(and Y2)-axis’. The types used for grid lines are the same as
these types.
Line width: Define the width of the line representing this observation set.
Color Color used for the line representing this observation set.
Pattern: Define the pattern inside the bars representing this observation set.
Pattern Description
0 100% white
1 2% shading
2 10% shading
3 20% shading
4 35% shading
5 55% shading
6 80% shading
7 99% shading
8 100% shading
Pattern color: Color filling for the bars.
Point marker: For charts with type *LINE this decides the form of the points
representing this observation set.
InterForm A/S 487