InterForm Manual - System & Method

Seqnbr. Type
1 9 Remap window Input line ___ - ___ Position ___ - ___
Print: From upper edge ______ Line spacing . . ___
From left edge ______ Ignore blank lines _ (Y N)
Adjustment _ (U L R C N B E +)
Rotation ___
Font ____ F4=List
Blank original _ B = blank original version
Condition: Position ___ - ___
Is > = < N _ ____________________________
Blank after _ B = Blank condition after
Input Line: The line interval to read including both lines entered here. If the end
line is left blank or the same as the begin line, only one line will be
remapped.
Position: The Column interval to read including both positions entered here.
The maximum position interval is 198 characters.
Upper edge: Inches, pels absolute to the upper edge of the page according to the
rotation specified by the global settings for the overlay.
From left edge: Inches, pels absolute to the left edge of the page according the
rotation specified by the global settings for the overlay.
Line Spacing: Measured in n/240" which means 6 lines per inch will give the value
40. Failure to fill in this value, will default to a linespacing of zero
resulting all text to be printed in one line.
Ignore Blank
Lines: Enabling this option will cause all blank lines to be discarded.
Adjustment: formatting of the character string. Valid values are:
U Un-formatted. The character string is printed without any
changes to formatting, and spaces.
L Left-adjustment. Spaces proceeding the first character in the
character string are removed, causing the string to be left
adjusted at the position indicated by From left.
C Centred. Spaces within the character string before and after
printable characters are being removed, and the string is
centred around the position indicated by From left.
R Right-adjustment. Spaces following the character in the
character string are removed, causing the string to be right
adjusted at the position indicated by From left.
N Numeric. Indicates if the characters in the character string
should be considered as numbers (amounts).
B Print succeeding spaces in barcode data. Indicates if the
spaces in the coloumn interval succeeding the barcode data
should converted to barcode. This only apply to the barcodes
128 and 3 of 9. The barcodes will always be left-adjusted.
E Full Justification. (aligning both left and right margins). This
function enables changes to the number of letters per line,
based on the font size and the max. line width of the
justification. Distance between words is automatically
adjusted.
Maximum line
width:: Defines the maximum length of the justified text
line.(Inch/pels)
InterForm A/S 77