InterForm Manual - System & Method

+ Opens up for Extended Adjustement for definition of
Underline of text in the tabulator and/or lines of periods
(known as punctuation or dot leaders) made after each line of
the tabulator. The following options appear when + is entered:
Adjustment: The adjustement of the underlined or
punctuated lines. Values U, L, C, R or N
acording to the above
Underline: Underlining of text in the tabulator (spaces
are not underlined).
Punctuation
Length: If the last position of a line in the tabulator, defined
by the second Input Position field, is a period
sign, a line of punctuation will be printed. The
punctuation will start after the last printable
character, and end at the position (inches,pels)
stated in this field counting from the position stated
in From Left. Only Adjustment values U and L can
be used. No punctuation will be made if other
values are used, if no period sign is found or if the
text exceeds the punctuation length.
Font: The new font of the formatted text.
Condition: An optional set of values used if the tabulator should be executed on
a certain condition.
Position: Only activate the tabulator If a character string in the interval of lines
defined by the Tabulator matches this character string according to
the following condition.
Is >= Greater than a number entered in the following field
= Equal to a number or a text string (case sensitive) or a
number entered in the following field.
< Less than a number entered in the following field
N Not equal to a number or a text string (case sensitive) or a
number entered in the following field.
A Acceptable characters. All the characters in marked interval
must be one of the characters in the following field.
U Unacceptable characters. None of the characters in the
marked interval must be one of the characters in the following
field.
(See page 79 for a tip on use of ‘>’ and ‘