InterForm Manual - System & Method

F24=More keys
The media type indicates the media used: *GAP means that the labels are separated by a gap,
and *MARK indicates labels indicated by a mark on the back of the media.
The Display Black/White image Command
The command, APF3812/DSPBWIMG can be used for graphically viewing a black and white
TIFF image using SwiftView.
®
If the image has been imported to InterForm400 via option 5. Work with Images in the
Administration Menu, only the parameters IMAGE and RESOLUTION has to be filled out (then
the TIFF image is a member in the APF3812/IMAGE file).
If the image is not placed in the APF3812/IMAGE file, this image can be viewed by stating *FILE
as the IMAGE parameter and the file and member name as the FILE and MBR parameters.
Type choices, press Enter.
456 User’s Manual for InterForm400 ®
Display Black/White image (DSPBWIMG)
Image . . . . . . . . . . . . . > IMAGE *FILE_____ Name, *FILE
Resolution . . . . . . . . . . . RESOLUTION 300 75, 100, 150, 200,
File . . . . . . . . . . . . . . FILE __________ Name
Library . . . . . . . . . . . *LIBL_____ Name, *LIBL,*CURLIB,
Member . . . . . . . . . . . . . MBR __________ Name
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
The Display IP Address Command
If you program yourself you might want to know the ip-address of the connected 5250 session for
an interactive job. You can find that out via the Display IP Address command
(APF3812/DSPIPADR). The command have no parameters and displays the result like this:
Display IP address
Device name . . . . . . : QPADEV000F
Device IP address . . . : 222.2.1.100
F3=Exit F12=Cancel