InterForm Manual - System & Method

Source Drawers for Copies
After having stated the number of copies, pressing Enter will extend the screen to include
definitions of source drawers:
Design InterForm 400 overlay APF300D
Overlay name: IF400DEMO Overlay text: Demo overlay for InterForm400
Number of copies of each page
Primary set . . . . . . . 2 1-9, *VAR, *INPUT
Secondary set . . . . . . 1 1-9, *VAR, *INPUT
Select paper from the following drawers:
Do you want stapling . . Y/N _
Copy Primary Secondary
1 __________ __________ Valid drawers
2 __________ 1-255
Valid paper types:
F4=List
F3=Exit F12=Cancel
F13=Set view/print parameters F14=PCL-view F18=DSPSPLF F19=DSPPFM
Here you can define from which drawer each copy should be taken from.
See Cassette Selection page 409 for more information of selecting by drawer number. Refer
to page 410 and 355 for information of how to select drawer by paper type.
� WARNING �
Different printer manufacturers have diverting opinions of which value should correspond to
which physical drawer. Therefore please consult your printers technical reference to verify the
drawer mapping.
� WARNING �
Combining Duplex with spooled file data on both back and front (i.e. without a back page
overlay) with copy management is not supported. If you try the result is not what you might
expect..
InterForm A/S 59