31.01.2013 Views

InterForm Manual - System & Method

InterForm Manual - System & Method

InterForm Manual - System & Method

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

How the sequence lines in overlay design are executed<br />

The execution order is of the sequence lines is depending on the type of the line. They are<br />

executed in this order:<br />

86 User’s <strong>Manual</strong> for <strong>InterForm</strong>400 ®<br />

1st. Frames, Lines, Text (option 5), Print-info, Ink, Images, PCL-files, HP/GL-files and<br />

Suboverlays.<br />

2nd. 9=Remap Window<br />

3rd. ?=If..Then<br />

Last 8=Tabulator<br />

Normally it is not necessary to remember this order, but when you mix them you could get a<br />

problem: If you specify to blank out remapped text by use of option 9=Remap Window, then<br />

you cannot use the text for a condition in If..Then. This can be solved by not blanking out the<br />

text in the Remap Window and instead insert an 8=Tabulator to tabulate the text out of the<br />

page after the If..Then has been executed.<br />

If you have several ?=If..Then lines, remapping the same line(s), then only the last condition<br />

met will have the lines remapped. The other conditional overlays are executed, but no lines are<br />

transferred.<br />

� WARNING �<br />

A deviation from the rules above are seen if you transfer 2 or more lines to a sub-overlay by<br />

use of If..Then. The second and following lines are transferred first - even before any Remap<br />

Windows in the main overlay are executed.<br />

� NOTE �<br />

Ink lines in the main overlay will have no effect in conditioned sub-overlays (called by<br />

If..Then).<br />

� NOTE �<br />

If you use absolute positioning for the sub-overlay called by If..Then you will notice this:<br />

Tabulators in the sub-overlay are unaffected by the positioning of the sub-overlay.<br />

Remap Windows in the sub-overlay add the vertical position specified in the If..Then<br />

command whereas the horizontal position is ignored.<br />

� TIP �<br />

Regarding design of Zebra overlays: If you want to insert text, frames or images in reverse<br />

i.e. white on black background you can do it by first adding a frame with black filling (=pattern)<br />

and then place the text or image on top of the black frame (without specifying white in an Ink<br />

command). In this manner you reverse the part of the text or image, that overlaps the black<br />

frame.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!