InterForm Manual - System & Method

Work with licence information LIC350D
InterForm 400 version . . : 2012.M01
Model / Feature . . . . . : 270 22A2
Serial number . . . . . . : 65BD1BB
Operating system . . . . : V5R3M000
Type options, press Enter.
2=Change 5=Display
Opt License code
_ Production key Not applied
_ Test key Not applied
_ Mirroring key-1 Not applied
_ Mirroring key-2 Not applied
F3=Exit F12=Cancel=Cancel
6. In the following screen you can set the preferred language used in InterForm400. The
language can be changed later if needed. This is done by option 2 at the
®
Administration menu to change the global settings for InterForm400 or use option 4
®
to select language for specific InterForm400 users.
®
Note: InterForm400 CL commands like MRGSPLFPDF, APF3812 etc. will be
installed in the language chosen here, and can not be changed unless a reinstallation
is made.
INS0121 InterForm 400 version 2012.M01 INTER03
Select primary language, press Enter.
Primary language . . . . . . . EN DE=Deutsch, DK=Dansk, EN=English,
ES=Españoles, FR=Français, PT=Português
Primary language is used for:
1. The language of commands.
2. The language of displays.
Notice:
Language of commands can only be selected during install.
Primary language can be changed at the administration menu option 2.
F3=Exit F12=Cancel
7. If you are unsure, you should leave the default values. Refer to page 371 for more
information on journaling.
InterForm A/S 29