InterForm Manual - System & Method

7. U ser Output Queue
This feature offers the possibility to move any spooled file to a user dependent output queue. It
can be reached from the InterForm400 Main Menu by first selecting 5. Work with Auto Forms
Control and then 7. User output queue.
Work with user output queues AFC315D
Position to . . . . . . __________ User profile
Type options, press Enter.
2=Change 3=Copy 4=Delete
Opt User profile Output queue Library Printer type
_ KSE HP5SI QUSRSYS HP4D
_ HVE PRT01 QUSRSYS HP4500
_ SR IMA7000 QUSRSYS HP4
F3=Exit F5=Refresh F6=Create F12=Cancel
Here you state a preferred output queue and the printer type used for merges for each user
profile. You distribute spooled files depending on the spooled file owner by use of 1=Merge with
Overlay or 5 = Move Spooled File line in AFC.
Refer to page 141 and 147 for details.
If the spooled file owner is not included in the list above, then the two Auto Forms Control options
will react differently:
1=Merge with overlay
If the user profile is not found, the AFC job will use the default output queue of the job and
that is also blank it will halt with a message (MSGW ) informing you, that the spooled file
owner is not in this list. You can then add the user and answer R-Retry or ignore the
merge element with I-Ignore.
5=Move spooled file
If the spooled file owner is not found, then the move element will be ignored and the
spooled file will remain on the same output queue.
End
InterForm A/S 271