InterForm Manual - System & Method

Extended Page Definition
Extended formatting is used to format intervals of lines from the spool entry. This method can
be used as alternative to using the design command type 9. Remap Window, and will work
with 8. Tabulator lines
If the global setting Extended Page Definition equals Y, the following screen will be displayed
Update extended page definition APF305D
Overlay name: MYDEMO Overlay text: Mydemo
Type option, Press Enter.
2=Change 3=Copy 4=Delete 5=Display 8=Start AFC-job 9=End AFC-job
From Top- Left Line-
Opt linenbr. margin margin spacing Font
(No extended page definitions - Press F6 to create.)
End
F3=Exit F5=Refresh F6=Add F12=Cancel
The Global settings Line Spacing, Extra blank lines on top and Font will be decisive until
the first line of extended page definition is met.
From line number: A line number of the spool entry, from which the formatting should
change. The formatting will be valid until a new line number is defined.
Top margin: Absolute margin from top edge of the page dissolved in whole inches
and pels (see Measuring formats page 61).
Left margin: Absolute margin from the left edge of the page dissolved in whole
inches and pels (see Measuring formats page 61). Note that this
value will be added to the leftmargin value of the overlay command
type 8. Tabulator.
Line spacing: Measured in n/240". For instance 6 lines per inch (1/6") will give the
value 40.
Font: The font ID of the formatted text.
F4: Prompting of the font list
F18: This function will display the spool entry with the job information used
for merge in option 3. Merge spool entry with overlay (page 114).
Pressing F18 will only work if this merge has been made prior to
entering this menu.
InterForm A/S 57