InterForm Manual - System & Method

Work with Output Queue
Queue: PRTHP3 Library: QUSRSYS
Type options, press Enter
1=Select 2=Change 3=Hold 4=Delete 5=Display 6=Release 8=attributes
Opt File User User Data Sts Pages Copies Form Type Pty
1 QPRINT INTERFORM INVOICE RDY 1 1 *STD 5
_ QPRINT INTERFORM PROFIT RDY 5 1 *STD 5
Parameters for option 2
===> __________________________________________________
F3=Exit F11=View 2 F12=Previous F21=Description F24=More keys
Code page: If the system is used by multiple countries, national characters may
get printed differently in each country if the code page is not specified
in the spool entry. This option will allow the code page of spool entry,
to be overruled. I this field is left blank and the spool file does not
specify a explicit code page, the system value will be used.
Merge overprint lines: Some spooled files will not react as expected when merging with an
overlay. This is the case when spooled files use overprinting i.e.
printing two lines on one e.g. for printing in bold - or if the output fields
are defined in the wrong order in the printer file.
Enable this feature and the overprinted spooled file lines are printed
as one meaning e.g. that bold created in this manner will be ignored.If
you press F19-DSPPFM in the green screen designer and you see
'0's in the left side of the screen, then this option should most
probably be activated.
Form type: The Form type of the resulting printout. Default *STD
Copies: 1-255
Drawer: Overwrite the drawer settings of the overlay global settings.
NOTE: Labels/Continuous, media type and print mode are all active for ZPL (Zebra) output
only.
Labels / Continuous: This is the feed control on the printer. Select 1=Labels if the media
contains of separate labels. select 2=Continuous if the media is not
separated into labels. Use 3=Weblabel and 4=Marklabel for other
ways to mark the labels on the media. In case of 2=Continuous you
would probably select 4=Cut for the print mode parameter.
Media type: Select 1=Termo transfer if you use a non heat sensitive media
otherwise use option 2=Transfer media.
Print mode: 1=Tear off mean that you will manually tear of the labels. 2=Rewind
can be used for rewinding all printed labels onto another roll. This
requires special hardware installed.
3= Peel off will print only one label at a time waiting for the current
InterForm A/S 115