InterForm Manual - System & Method

A ppendix G - Limitations of the Light Version
The following are rules given for the Light version:
1. Spool entries for manual merge can only be selected from the queues named
AFC_INPUT1 and AFC_INPUT2.
2. The program will support only two sets of AFC print queues. These queues are named
AFC_INPUT1, AFC_OUT1, AFC_INPUT2 and AFC_OUT2. The queues can be mixed
(e.g. AFC_INPUT1 -> AFC_OUT2), and input from e.g. AFC_INPUT1 can, by the
existing AFC functions, be split up to print merged data to both AFC_OUT1 and
AFC_OUT2.
3. The queues AFC_INPUT1 and AFC_OUT1 is the set of queues installed according to
the Getting Started section. These queues can of course be used in production also,
but care should be taken when calling the program AFCINSTALL as all definitions in
the AFC definition AFC_INPUT1 will be overwritten by the sample definitions.
4. All 4 queues must be placed in the library APF3812. Therefore, in the screen shown
when choosing F6=add under 1.Functions attached to output queues, the Library
field will not be displayed.
5. Make sure the Light code is entered in the old version before making a Release
Update (APFRELUPD). (make sure the Main Menu indicate Light before you rename
the APF3812 library to APF3812OLD). If the light code is not entered prior to the
update, the AFC definitions in the AFC job/queue AFC_INPUT1 in the new version will
not be updated with your AFC definitions from library APF3812OLD.
6. When running a Release Update, existing AFC definitions, other than AFC_INPUT1
and AFC_INPUT2, will be updated as well, even though the Light code has been
entered prior to the Release Update.
However, it is the customers responsibility to change the Output queue and the
AUTO_FORM job names of these AFC job/queues to either AFC_INPUT1 or
AFC_INPUT2, or to set Auto-start = N for the AUTO_FORM jobs.
7. Attempts to start AFC jobs with other names than AFC_INPUT1 or AFC_INPUT2 will
result in error conditions.
It is the customers responsibility not to start AFC jobs with other names (avoid by
setting Auto-start job = N).
8. Attempts to start the AFC jobs AFC_INPUT1 or AFC_INPUT2 (updated by a Release
Update) with AFC definitions containing other queue names than AFC_INPUT1/2 or
AFC_OUT1/2, will result in error conditions.
It is the customers responsibility not to change the names.
9. Output queues (updated by a Release Update) defined under 2. Forms Type Table
must be either AFC_OUT1 or AFC_OUT2. It is the customers responsibility to correct
existing definitions.
10. Function 5=Move Spooled File in Auto Forms Control is NOT supported in the light
version.
11. The CL Command APF3812 does not work in the light version.
12. No PDF and e-mail support.
13. The *USER option for 1=Merge with overlay in Auto Forms Control is not supported.
Conditions for new features will be added as they are being implemented.
InterForm A/S 423