InterForm Manual - System & Method

82 User’s Manual for InterForm400 ®
Vertical cursor repositioning
before execute of sub overlay
Position related to actual position
Number of pels . . ( -99 - 99 )
Or reposition related to previous
non blank input line
Number of pels . . ( 0 - 999 )
Or reposition after execute of suboverlay
related to highest Y-adress used in any
remap window in sub-overlay.
Number of pels . . 40 ( 0 - 999 )
F3=Exit F12=Cancel
With this function you can vertically reposition the rest of the spooled
file i.e. move the spooled file contents and all relatively positioned
elements e.g. tabulators and remaps.
Position related to actual position:
This will move the rest of the spooled file up (negative value) or down
(positive value). See page 106 for an example which uses this option.
Reposition related to previous non blank input line:
Use this repositioning e.g. in order to close the gap of blank lines on
the original spooled file. (Use the If..Then scanning from the last non
blank line.)
Reposition after execute of suboverlay:
The main benefit from this option is that if you are using an extended
remap window in the suboverlay, then you can make the height of the
suboverlay adaptive - to fit the text remapped lowest on the page, but
this option can be used whenever the height of the suboverlay is
uncertain.
Upper Edge: Inches, pels position according to the entry of the following field:
A Vertical position of the sub-overlay is made absolute to the
upper edge of the paper. Vertical positioning of elements in
the sub-overlay is added to this value.
+ The sub-overlay is re-positioned downwards relative to the
position of the string matching the criteria for the sub-overlay
to be called. Vertical positioning of elements in the suboverlay
is added to this value.
- The sub-overlay is re-positioned upwards relative to the
position of the string matching the criteria for the sub-overlay
to be called. Vertical positioning of elements in the suboverlay
is added to this value.
Left Edge: Inches, pels position according to the entry of the following field:
A Horizontal position of the sub-overlay is made absolute to the
left edge of the paper. Horizontal positioning of elements in
the sub-overlay is added to this value.
+ The sub-overlay is re-positioned to the right relative to the
position of the string matching the criteria for the sub-overlay
to be called. Horizontal positioning of elements in the suboverlay
is added to this value.
- The sub-overlay is re-positioned to the left relative to the
position of the string matching the criteria for the sub-overlay