InterForm Manual - System & Method

Update AFC-functions attached to output queues AFC305D
Output queue . . . . : PRTHP3_AFC
Library . . . . . : QUSRSYS
Seqnbr F. Form type Save Jobname Filename Device file Program
Seqnbr Function
1,0 1 Merge with overlay
Overlay name . . . . . . . . . . __________
File set . . . . . . . . . . . __________
Or overlay selector . . . . . . . ________
Primary/Secondary set . . . . . . *PRI *PRI, *SEC
Form type . . . . . . . . . . . . __________
Copies of each page . . . . . . . ______ *INPUT, 01-99
F3=Exit F13=Fold/Unfold F11=Delete F12=Cancel
Overlay name: The Overlay you want to merge with. Use F4 to get a list
File set: The file set containing the above overlay.Use F4 to get a list.
Overlay selector: If the above is not filled in, it means you intend to use an Overlay
Selector in order to search the spool data for special conditions, that will
select the overlay. See page 119 On how to use the Overlay Selector.
Primary/
Secondary Set: This option will decide if the Primary or the Secondary set of copies of
an overlay are to be processed. The two sets of copies are defined in
Copy Management (page 58) if the Global Setting, Copy
Management is set to Y. If this setting is N for the overlay, the overlay
is regarded as Primary. *PRI is default for this option.
Form Type: The Form type of the resulting print out. It is recommended to use *STD
for all output in order to avoid prompting for change of forms from the
queue.
Copies: You can decide how many exact duplicates you want of each page in
the spool entry. Note that if you want different contents for the
duplicates you must define this in Copy Management for the overlay,
or you can define another sequence line in this AFC definition which
processes the same spool entry once more but with a different overlay.
This screen is only shown if you are merging with an overlay or overlay selector for a label
printer (i.e. Zebra):
InterForm A/S 143