InterForm Manual - System & Method

In this example, we have chosen to work with overlay definitions.
Work with File-sets in Import Library IMP412D
Position to . . . . . . File-set
Type options, press Enter.
1=Move to production 4=Delete 7=Rename file-set
12=Work with overlays in file-set
Opt File-set Description Notice
12 SAMPLE InterForm 400 Samples Exists
F3=Exit F12=Cancel
Note: Renaming e.g. file sets that already exists (using option 7. Rename file set) will prevent
file sets from being overwritten.
Notice, however, that the users must be connected to the new file sets, in order to use the
overlays imported.
Option 9. Work with changes on the Import menu enables you to take advantage of the fact,
®
that every import requires journaling of InterForm400 files. Using this option you can e.g.
regret the last import (*IMPORT) or changes done in the graphical designer (*PC-SAVE) and
®
roll the InterForm400 back to the state prior to the import. (Use e.g. option 1=Rebuild to
status before change on the Work with changes menu.
40. Install/upgrade InterWord 400
TM
This option can be used for installing or upgrading InterWord400 . This is done by installing a
PTF, which must be placed in the APF3812 folder.
You are prompted for what PTF you want to install like option 50. Apply PTF from folder
APF3812. Enter the PTF number, that you want to install, press Enter and this screen below is
TM
shown. Press F10 to confirm the install or upgrade of InterWord400 .
End
InterForm A/S 379