InterForm Manual - System & Method

Step 4. Edit Subject Text
Now we will change the appearance of the subject header text (Re. Your new...). We therefore
click on the element after which we want to insert the new element:
Now we click the tabulator element on the left ( ) to add our first element.
Then drag with the left mouse button pressed around the text to be changed like below:
In the lower right corner of the designer we can see which lines and positions we have
marked:
Finally we click in the result view to place the distance from the left where this should be
placed. In this case we want to center the text around 4 inches from the left. After this the
tabulator is added. Now we can change the properties for the tabulator. Select the ‘Formatting’
tab:
We can fine adjust the distance from the left to exactly 4 inches if needed. Also the font is set
to 9906 and we chose to center the text around the 4 inch reference.
90 User’s Manual for InterForm400 ®