InterForm Manual - System & Method

What to do if more than max. pages to a recipient:
®
Outsorting. InterForm400 will inform the Insertion system to outsort the pages for
this recipient ID according to the selections on the next screen.
More than 1 envelope:
®
InterForm400 will automatically continue insertion in new envelopes.
Can there be code for outsorting in the printout:
®
Yes: InterForm400 will insert the outsorting command selected on the
next screen, only when the code value defined below is found.
®
No: InterForm400 will insert the outsorting command selected on the
next screen, whenever a set of pages for a recipient exceeds the
number defined in Max. pages per envelope.
If YES to the above.
Line number. The line number to find the outsorting code
Position: The coloumn position to find the outsorting code
Value: The character value for the outsorting code, that will inform
®
InterForm400 to insert the outsorting command according to the
selection on the next screen.
Press Enter to define the type of Outsorting mark:
Update Finish Definition PRS310D
Inserting equipment . . . : Pitney Bowes
Which types of marks are used
1=Select
_ Benchmark (BM)
_ End of collation (EOC)
_ End of collation mark absence (ECA)
_ Beginning of collation (BOC)
_ Divert to Deck (DTD)
_ Wrap around sequence (WAS) Ascending
_ Wrap around sequence (WAD) Decending
_ Parity (PR)
_ Safty (SF)
F3=Exit F12=Cancel
Refer to the documentation of your Pitney Bowes insertion system for a thorough description
of the outsorting marks.
When filled in press Enter, and continue with the next section Define Level Break
Conditions.
InterForm A/S 203