InterForm Manual - System & Method

*No = Only downloaded to the memory of the printer.
*HP4 = Store in HP Flash SIMM.
OUTQ: Here the output queue for the final printout is stated. The macro will
be transformed into a spool-entry with the filename MACROnnnnn,
where nnnnn is the macro ID. The description of the spool entry will
be the name of the overlay.
FORMTYPE: This is the forms type you want the macro to have when placed as a
spool-entry on the output queue defined by OUTQ.
The output will be placed in the output queue with status HOLD(*YES) and SAVE(*YES).
W hen you wish to download the macro you only have to release the spool entry.
The Import InterForm400 Resources Command
With this command you can import InterForm400 resources directly into production (into the
APF3812 library) without a lot of menu selections:
Type choices, press Enter.
Import InterForm resources (IMPAPFRSC)
Save file . . . . . . . . . . . SAVF __________ Name
Library . . . . . . . . . . . *LIBL_____ Name, *LIBL, *CURLIB
Transfer to production . . . . . TFRPROD *YES___ *YES, *NO, *PROMPT
Display errors . . . . . . . . . DSPERR *YES *YES, *NO
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
Refer to page 529 for more information of this command.
The PCL-file from folder to Member Command
The APF3812/PCLTOMBR command can be used for inserting one or several PCL files (from
a folder) into a physical file as members. The PCL files can be specified as generic or *ALL.
InterForm A/S 459