InterForm Manual - System & Method

Output Queue: The name of the output queue where the spool entry to be merged is
placed.
Library: The library of the above output queue. If left blank the library list will
be used.
F18: DSPSPLF
With the Remap Window this function is relevant for displaying the spool entry in order
to determine lines and columns for the Remap Window. F18 prompts the command
DSPSPLF with the job information set by F13 Set view/Print parameters, or by in
menu 3. Merge spool entry with overlay (page 114). Pressing F18 will only appear if
this has been set prior to entering this menu .
F19: DSPPFM
This function works like F18, but prompts the commands DSPPFM for displaying the
spool entry as a physical file. This is useful for revealing reprinted lines (bolding),
which is not displayed with F18 DSPSPLF.
Remember to subtract the first 4 positions containing SKIP/SPACE information, when
calculating coloumn positions in the DSPPFM view..
Considerations for Zebra overlays
� NOTE �
Creation of ZPL output in InterForm400 requires purchase of the ZPL module or the classic
package.
For overlays intended to be used for label printers the Design Overlay screen will look like this:
Design ZEBRA overlay ZEB300D
Overlay name TEST
Overlay text _______________________________________________
Label length __.000
Label width __.000
Temperature _0_ -30 - 30
Print speed 2 2, 3, 4, 5, 6, 8 inches/second
Line spacing 040___ in 1/240 of an inch (*INPUT, 1-720)
Rotation 000___ (*INPUT, 0, 90, 180, 270)
Font 0012__ *INPUT, fontnumber F4=List
Copy management Y (Y N)
F3=Exit F4=Prompt F11=Delete this overlay F12=Cancel
F13=Set print parameters
The especially Zebra related parameters are:
Label length/width:
The length and width of the labels to print on.
Temperature: The temperature to use for the printing head. This number is a relative
value (-30 to 30) for the temperature to use for the print head of the Zebra
InterForm A/S 55