InterForm Manual - System & Method

Endpoint 2
From Top: Inches, pels absolute to the top edge of a portrait page regardless of
the rotation specified by the global settings for the overlay.
From left: Inches, pels absolute to the left edge of a portrait page regardless of
the rotation specified by the global settings for the overlay.
Thickness
in pels: Thickness of a the line in pels (1/240"). Zero means no border.
Move Right: Inch,pels of the right movement of a duplicate of the line relative to the value
for left edge
Move Down: Inch,pels of the vertical movement of a duplicate of the line relative to the
value for Top edge
Extra times: Extra copies of the line excluding the original. Extra copies will be displaced
relative to each other according to the settings of Move right and Move
Down.
If you are making horizontal and vertical lines it is recommended that you use definition 2 and
3, and only use this definition for making diagonal lines.
5=TE X T
This can be used to insert text constants with varying fonts in the overlay.
70 User’s Manual for InterForm400 ®
Seqnbr. Type Inch.pel
26,0 5 Text constant From top edge ______
From left _______
Adjustment _ (U C R)
Rotation ___
Font ____ F4=List
Text _____________________________________
_________________________________________________________________________________
______________________
F3=Exit F4=Prompt F12=Cancel F18=View Spool entry
From Top: Inches, pels absolute to the top edge of the rotation specified by the global
settings for the overlay.
From left: Inches, pels absolute to the rotation specified by the global settings for the
overlay.
Adjustment: Adjustment to use: U=Unadjusted, C=Centered, R=Right adjusted.
Rotation: The available values for rotation are: 000, 030, 090, 120, 180, 210, 270, 300
degrees.
Font: The font ID of the formatted text.
Text: Text field