InterForm Manual - System & Method

Import PCL file
Press F6 to load a PCL file into InterForm400 ®
Load PCL-file PCL110D
PCL-file . . . . . . . . . ________
Description . . . . . . . _______________________________________________
Load from . . . . . . . . _ 1=PC file in the /APF3812Home/Work dir
2=Output queue
F3=Exit F12=Cancel
Enter the member name into which you want to add the PCL file, and which is referred to in an
overlay definition.
Enter whether you want to read the PCL file from a spool file or from the /APF3812Home/Work
directory. In both cases a HP-PCL driver have been used to format the overlay created in a PC
application.
If reading from the /APF3812Home/Work directory, the PCL driver should be configured to
print to a file. Either directly into the folder APF3812, or to the local hard drive and copied to
the folder.
If reading from output queue the PCL driver must be defined to print on a local printer on the
System i through iSeries Access.
W hen PCL-File and Load From is defined, the selection for the PC file will appear. If selecting
read from the /APF3812Home/Work directory, you will be able to use F4 to list available files
Load PCL-file PCL110D
PCL-file . . . . . . . . : PH
Description . . . . . . : ________________________________________________
Load from . . . . . . . : 1 1=PC file in the /APF3812Home/Work dir
2=Output queue
From PC-file . . . . . . . ____________
F3=Exit F4=List F12=Cancel
� TIP �
You can use the PCLTOMBR command to import multiple B/W PCL files from e.g. a folder in
qdls.
InterForm A/S 353