InterForm Manual - System & Method

Step 10. Defining the 5 Item Coloumn Frames
W e now want to define some frames to divide the item lines columns in the spool entry:
We want to place the definition just after the previous definition of the raster frames. So we
click that frame element and add a new one: (Dragging around the first coloumn)
Notice, that the thickness suggested will be that one last used (0), so you need to set it to ‘1'.
Also notice the Repeat setting to add frames around all the columns.
Step 11. Defining the logo as a water mark
Instead of a signature we want to place the logo as a watermark in the bottom of the page.
For this we use the logo already used in the top of the overlay, but manipulate it to work as a
watermark. We intend to do the following compared to the original logo (see page 41):
1. Reverse it.
2. Scale it to double size
3. Grayscale it
We define the sequence line for the logo just after the other logo by clicking the first logo
element on the element list, clicking the image element on the left:
- and then clicking in the Result Window (on the left above
‘Regards’) to insert it. After that we select the B/W image: DEMOIMAGE and change the
settings to reverse and double size (300 DPI):
InterForm A/S 99