View/Open - JUWEL - Forschungszentrum Jülich

181
[15] Gebert, M. „Benchmarking-Methodik für Komponenten in Polymerelektrolyt-Brennstoffzellen”,
Dissertation RWTH Aachen (2004), Aachen, Deutschland
[16] Uribe, F.A., Zawodzinski, Jr., T. A. „A study of polymer electrolyte fuel cell performance
at high voltages. Dependence on cathode catalyst layer composition and on voltage
conditioning“, Electrochimica Acta 47 (2002), pp. 3799-3806
[17] Ralph, T.R., Hogarth, M. P. „Catalysis for Low Temperature Fuel Cells, Part I: The
Cathode Challenges“, Platinum Metals Rev. 46 (1) (2002), pp. 3-14
[18] Wilson, M.S., et al. „Electrocatalysis, Issues in Polymer Electrolyte Fuel Cells“, in: Proceedings
of the 28th IECEC, 1993, pp. 1.1203–1.1208.
[19] De Castro E.S., et al. „Integrated Manufacturing for Advanced Membrane Electrode
Assemblies“, in: FY 2003 Progress Report, U.S. Department of Energy (2003),
Washington, U.S.A.
[20] Prabhuram, J., et al. „Synthesis and physical/electrochemical characterization of Pt/C
nanocatalyst for polymer electrolyte fuel cells“, Journal of Power Sources 134 (2004),
pp. 1–6
[21] Mathias, F.M. et al. „Diffusion media materials and characterisation”, in: Handbook of
Fuel Cells Volume 3, pp. 517-537, Wiley Verlag (2003), West Sussex, England
[22] Schulze, M., et al. „Degradation of sealings for PEFC test cells during fuel cell operation“,
Journal of Power Sources 127 (2004), pp. 222–229
[23] Persönliche Mitteilung Dr. J. Wolf, Firma Freudenberg FCCT oHG, 2004
[24] Geiß, S. „Brennstoffzelle - eine Herausforderung für innovative Dichtungslösungen”,
Vortrag auf der Brennstoffzellentagung Mobilität und Energie (2003), Steyr, Deutschland
[25] Banhardt, V., Rinn, G., Neuweger, H. „Development of mass production technologies for
advanced graphite-composite bipolar plates”, in: Courtesy Assoc., Washington D.C.
„2002 Fuel Cell Seminar Abstracts”, pp. 66-69, Palm Springs, U.S.A.
[26] Galli, S., et al. „Performance evaluation of a fuel cell with membrane electrode gasket
assembly (MEGA) technology”, in: Courtesy Assoc., Washington D.C. „2002 Fuel Cell
Seminar Abstracts”, pp. 200-202, Palm Springs, U.S.A.
[27] Ohara, H., et al. „Development of 5 kW PEFC system“, in: Proceedings of the ICOPE-
03, International Conference on Power Engineering (2003), Kobe, Japan
[28] Produktinformation Firma Plug Power, 968 Albany-Shaker Road, 12110 New York,
U.S.A., www.plugpower.com
[29] Ruge, M.D. „Entwicklung eines flüssigkeitsgekühlten Polymer-Elektrolyt-Membran-
Brennstoffzellenstapels mit einer Leistung von 6,5 kW” Dissertation ETH Zürich (2003),
Diss. ETH Nr. 14901, Zürich, Schweiz
[30] Barbir, B., et al. „Fuel cell stack and system development: matching markets to
technology“, in: Courtesy Assoc., Washington D.C. „2002 Fuel Cell Seminar Abstracts”,
pp. 948-951, Palm Springs, U.S.A.
[31] Mitchell, W.L. „Progress in small-scale stationary fuel cell development and commercialization“,
in: Courtesy Assoc., Washington D.C. „2002 Fuel Cell Seminar Abstracts”,
pp. 952-955, Palm Springs, U.S.A.
[32] Produktinformation IdaTech, 63160 Britta Street, 97701 Bend, U.S.A., www.idatech.com