View/Open - JUWEL - Forschungszentrum Jülich
View/Open - JUWEL - Forschungszentrum Jülich
View/Open - JUWEL - Forschungszentrum Jülich
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
183<br />
[51] Bevers, D., Wöhr, M. „Simulations of a polymer electrolyte fuel cell electrode”, Journal<br />
of Applied Electrochemistry 27 (1997), pp. 1254-1264<br />
[52] Lee, J.H., Lalk, T.R., Appleby, A.J. „Modeling electrochemical performance in large<br />
scale proton exchange membrane fuel cell stacks”, Journal of Power Sources 70 (1998),<br />
pp. 258-268<br />
[53] Squadrito, G., et al. „An empirical equation for polymer electrolyte fuel cell (PEFC)<br />
behaviour”, Journal of Applied Electrochemistry 29 (1999), pp. 1449-1455<br />
[54] Mann, R.F., et al. „Development and application of a generalized steady-state electrochemical<br />
model for a PEM fuel cell”, Journal of Power Sources 86 (2000), pp. 173-180<br />
[55] Pisani, L., et al. „A new semi-empirical approach to performance curves of polymer<br />
electolyte fuel cells”, Journal of Power Sources 108 (2002), pp. 192-203<br />
[56] Jeng, K.T., Kuo, C.P., Lee, S.F. „Modeling the catalyst layer of a PEM fuel cell cathode<br />
using a dimensionless approach”, Journal of Power Sources 128 (2004), pp. 145-151<br />
[57] Hsuen, H.-K. „Performance equations of polymer electrolyte fuel cells“, Journal of Power<br />
Sources 126 (2004), pp. 46-57<br />
[58] Kulikovsky, A.A. „The voltage-current curve of a polymer electrolyte fuel cell: „exact“ and<br />
fitting equations“, Electrochemistry Communications 4 (2002), pp. 845-852<br />
[59] Markovic, N.M., et al. „Oxygen Reduction Reaction on Pt and Pt Bimetallic Surfaces: A<br />
Selective Review”, Fuel Cells 1 (2001), pp. 104-116<br />
[60] Kulikovsky, A.A. „The effect of stoichiometric ratio λ on the performance of a polymer<br />
electrolyte fuel cell“, Electrochimica Acta 49 (2004), pp. 617-625<br />
[61] Kornyshev, A.A., Kulikovsky, A.A. „Characteristic length of fuel and oxygen consumption<br />
in feed channels of polymer electrolyte fuel cells“, Electrochimica Acta 46 (2001), pp.<br />
4389–4395<br />
[62] Taniguchi, A., et al. „ Analysis of electrocatalyst degradation in PEMFC caused by cell<br />
reversal during fuel starvation“, Journal of Power Sources 130 (2004), pp. 42–49<br />
[63] Knights, S.D., et al. „Aging mechanisms and lifetime of PEFC and DMFC”, Journal of<br />
Power Sources 127 (2004), pp. 127-134<br />
[64] Stumper, J., et al. „In-situ methods for the determination of current distributions on PEM<br />
fuel cells”, Electrochimica Acta 43 (24) (1998), pp. 3773-3783<br />
[65] Mench, M.M., Wang, C.Y. „An In Situ Method for Determination of Current Distribution in<br />
PEM Fuel Cells Applied to a Direct Methanol Fuel Cell“, Journal of The Electrochemical<br />
Society 150 (1) (2003), pp. A79-A85<br />
[66] Mench, M.M., Wang, C.Y., Ishikawa, M. „In Situ Current Distribution Measurements in<br />
Polymer Electrolyte Fuel Cells“, Journal of The Electrochemical Society 150 (8) (2003),<br />
pp. A1052-A1059<br />
[67] Noponen, M., et al. „Measurement of current distribution in a free-breathing PEMFC“,<br />
Journal of Power Sources 106 (2002), pp. 304–312<br />
[68] Cleghorn, S.J.C., et al. „A printed circuit board approach to measuring current distribution<br />
in a fuel cell“, Journal of Applied Electrochemistry 28 (7) (1998), pp. 663-672<br />
[69] Brett, D.L.J., et al. „Measurement of the current distribution along a single flow channel<br />
of a solid polymer fuel cell”, Electrochemistry Communications 3 (2001), pp. 628-632