GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

Motors 6-23
H-Series Motor Catalog Number
Note: Catalog numbers consist of various characters, each of which identifies a specific version or option
for that component. Use the catalog numbering table chart below to understand the configuration of
your motor. For questions regarding product availability, contact your Allen-Bradley distributor.
H - 4030 - P - x xx xx
Factory Designated Special Options
AA = STANDARD
AN = NEMA (4000 Series Only)
Options
00 = STANDARD
04 = 24V DC Brake
Optical Encoder Line Count
F = 1000
H = 2000 (STANDARD)
K = 5000
L = 500
M = 3000
Motor Winding Ke Designator
Frame Size
Series Designator
H = Low Inertia
Note: Optional configurations or encoder line counts have
extended lead times and additional charges.
Note: Options are not available in all sizes.
Note: 5000-line count encoder, motor top speed is limited to
3600 RPM due to frequency output limit of encoder.
Check drive system configuration data for any additional
restrictions imposed by drive input.
Note: For H-6000 series motors, the top speed is limited to
2400 RPM due to frequency output limit of encoder.
Check drive system configuration data for any additional
restrictions imposed by drive input.
Publication GMC-SG001E-EN-P — June 2001