GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

Motion Control Accessories 8-43
460V MP-Series Motor Cable Catalog Numbers
Catalog numbers consist of various characters, each of which identifies a specific version or option for that
component. Use the catalog numbering charts below to understand the configuration of your cables. For
questions regarding product availability, contact your Allen-Bradley distributor.
460V MP-Series Power Cable Catalog Number
2090 - C D N PB MP - 16 S xx
460V MP-Series Feedback Cable Catalog Number
Length
05 = 5 m (16.4 ft)1, 15 = 15 m (49.2 ft)2, 30 = 30 m (98.4 ft)3, 60 = 60 m (196.8 ft)3, and 90 = 90 m (295.29 ft)4
Motor Connector
S = Straight
Wire Guage Size (AWG)
Motor Series
MP
Cable Type
PB = Motor power
Flex Type
N = Non-flex cable
Drive
Drive Family
Bulletin Number
1 Tolerance is +10/-0 cm (+25.4/-0 in.).
2 Tolerance is +45/-0 cm (+114.3/-0 in.).
3 Tolerance is +60/-0 cm (+152.4/-0 in.).
4 Tolerance is +90/-0 cm (+228.6/-0 in.).
2090 - C D N FD MP -S xx
Length
05 = 5 m (16.4 ft)1, 15 = 15 m (49.2 ft)2, 30 = 30 m (98.4 ft)3, 60 = 60 m (196.8 ft)3, and 90 = 90 m (295.29 ft)4
Motor Connector
S = Straight
Motor Series
MP
Cable Type
FD = Motor feedback to no connector
Flex Type
N = Non-flex cable
Drive
Drive Family
Bulletin Number
1 Tolerance is +10/-0 cm (+25.4/-0 in.).
2 Tolerance is +45/-0 cm (+114.3/-0 in.).
3 Tolerance is +60/-0 cm (+152.4/-0 in.).
4 Tolerance is +90/-0 cm (+228.6/-0 in.).
Publication GMC-SG001E-EN-P — June 2001