GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

8-64 Motion Control Accessories
1326AS Series Motor Junction Box Kit
The 1326AS motor junction box kit allows the existing motor connectors to be mounted axially (rather
than radially) without further wiring. Motors with IP65 protection maintain their rating when using this
option.
Note: The connector may be mounted to the face or rear of the motor.
Figure 8.66
1326AS Servo Motor Junction Box Configuration (1326AS-RJ34)
Side cover plate
Side gasket
Larger
Mounting
Holes
Quick Disconnects
(Bayonet Release)
Gasket
Junction box mounted
away from the motor
shaft.
Motor Junction Box Dimensions
Figure 8.67
1326AS Servo Motor Junction Box Dimensions (1326AS-RJ34)
Junction box mounted
away from the motor shaft
Dimensions are in millimeters (inches).
C
Top Cover Plate
and Gasket
P
Quick Disconnect
(Bayonet Release)
Gasket
Side Cover Plate and Gasket
N
Kit
1326AB-MOD-
C
mm (in.)
P
mm (in.)
N
mm (in.)
RJAB1 63.5 (2.5) 105 (4.13) 62 (2.44)
RJC1 66.675 (2.625) 120.65 (4.75) 66.675 (2.625)
Publication GMC-SG001E-EN-P — June 2001