GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

4-14 1394 Drive System Family
1394 Axis Module, Drive Interface Module, and DC Link Module Dimensions
Figure 4.7
1394 Axis Module and DC Link Module Front View Dimensions (1394x-AM03, -AM04, -AM07, -DIM, and -DCLM)
400
(15.75)
350
(13.78)
25
(0.98)
385
(15.16)
8 (0.32)
Dimensions are in millimeters and (inches).
Mounting Hole Detail
8 (0.31)
10.1 (0.4)
Fastener
Location 1 15.9 (0.63)
8 (0.31)
12 (0.47)
All slots accept M6 or 1/4-20 Mtg. screws.
1 Dimension shown is for mounting hardware location
and does not reflect the location of the lower slot
radius.
50
(1.97)
50
(1.97)
50
(1.97)
Figure 4.8
1394 Axis Module and DC Link Module Side View Dimensions (1394x-AM03, -AM04, -AM07, -DIM, and -DCLM)
280
(11.02)
350
(13.78)
Dimensions are in millimeters and (inches).
40.13
(1.58)
Important: Additional clearance below the axis is necessary
to allow for the recommended cable bend radius.
Publication GMC-SG001E-EN-P — June 2001