GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

8-34 Motion Control Accessories
Figure 8.43
1394 Filter Dimensions (SP-74102-006-03)
20 (0.78)
646 (25.43)
L3
L2
Line
L1
E
35 (1.37)
L3
L2
192 (7.55)
L1
Load
E
Dimensions are in millimeters (inches).
686 (27)
263 (10.35)
35 (1.37)
70 (2.75)
20 (0.78) 646 (25.43)
1394 External Shunt Kit and Modules
Shunt modules dissipate excess regenerative power from the Bulletin 1394 system. An external shunt
resistor kit (1394-SR10A) is available for 5 and 10 kW systems with regenerative loads that exceed the
capacity of the internal 200W shunt resistor provided. Most 5 and 10 kW systems will not require an
external shunt resistor kit.
All 22 kW 1394 system modules require an external shunt module (1394-SR9Ax or 1394-SR36Ax). Shunt
modules with (rms) power output of 300, 900, 1800 and 3600W continuous, 160,000W peak are available
for use with the smart power 22 kW system module. You must use one shunt module with each 22 kW
smart power system module. Available in two sizes, each package contains an integral fuse and terminal
block. The 3600W package is available with a 115/230V AC cooling fan. Choose your shunt module based
on the shunt requirements of the 1326Ax-Bxxxx servo motors you plan to run using the 1394.
Figure 8.44
1394 External Shunt Module
Publication GMC-SG001E-EN-P — June 2001