GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

8-54 Motion Control Accessories
1326AB and 1326AS Servo Motor Catalog Numbers
The following sections contain the 1326AB and 1326AS motor power and feedback cable catalog numbers.
Catalog numbers consist of various characters, each of which identifies a specific version or option for that
component. Use the catalog numbering charts below to understand the configuration of your cables. For
questions regarding product availability, contact your Allen-Bradley distributor.
Motor Power Cables
1326 - C P xx x - xx x xxx
Cable Length
001 = 1m (3.3 ft.)
002 = 2 m (6.6 ft.)
004 = 4 m (13.1 ft.)
005 = 5 m (16.4 ft.)
006 = 6m (19.7 ft.)
008 = 8 m (26.3 ft.)
IP Rating
Blank = IP65
L = IP67, harsh environment
Connector Accessory
Blank = Single-standard connector
D = Double-ended, standard connector
E = Bulkhead connector
EE = Double-ended, bulkhead connector
RA = Right-angle connector (keyed with shaft exit)
RB = Right-angle connector (keyed with rear exit)
Flex Cable Option
Blank = No option, standard cable
T = Flex-rated cable for high-flex applications
Motor Size Used On
B1 = Power cable for 1326AB-B4xxxx, and -B5xxxx or 1326AS-B3xxxx and -B4xxxx
C1 = Power cable for 1326AB-B7xxxx or 1326AS-B6xxxx and B8xxxx
Function
P = Power connection
Type
C = Connector and cable assembly
Bulletin Number
010 = 10 m (32.8 ft.)
015 = 15 m (49.2 ft.)
030 = 30 m (98.4 ft.)
060 = 60 m (196.8 ft.)
084 = 84 m (275.5 ft.)
090 = 90 m (295.2 ft.)
Auxiliary Feedback Cables
1326 - C E U xxx
Cable Length
15 = 4.6 m (15 ft.)
30 = 9.1 m (30 ft.)
50 = 15.2 m (50 ft.) 1
90 = 30.4 m (100 ft.) 1
Motor Size Used On
U = Commutation and encoder cable for all series motors
Function
E= 845H Encoder
Type
C = Connector and cable assembly
Bulletin Number
1 Recommended for use with 12V encoders only.
Publication GMC-SG001E-EN-P — June 2001