GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

Introduction
Important User Information
This guide has been developed as a quick reference tool for Allen-Bradley ® motion controls and
systems. It is not intended to replace user manuals or technical documentation supplied with our
Allen-Bradley equipment, which should be referred to for actual installation, connection,
operation, and maintenance of A-B equipment.
Because of the variety of uses for the products described in this publication, those responsible for
the application and use of this control equipment must satisfy themselves that all necessary steps
have been taken to ensure that each application and use meets all performance and safety
requirements, including any applicable laws, regulations, codes and standards.
Reproduction of the contents of this copyrighted publication, in whole or in part without written
permission of Allen-Bradley Company, Inc. is prohibited.
Allen-Bradley and PLC are registered trademarks of Rockwell Automation.
ControlLogix, ControlNet, DeviceNet, Data Highway Plus, DeviceNet, GML, IMC, Logix, RSLogix 5000, SCANport, SLC, SLC 5/03, SLC 5/
04, SLC 5/05, Smart Motor, SoftLogix, SoftLogix5800, Ultraware, Ultra5000, Ultra5000-DN, Ultra3000, Ultra3000i, Ultra3000-SE,
Ultra3000X-DN, and Ultra3000-DN are trademarks of Rockwell Automation.
IBM is a registered trademark of International Business Machines Corporation.
Microsoft, Windows, Windows 95, Windows 98, Windows 2000, and WindowsNT are registered trademarks of Microsoft Corporation.
Pentium and Pentium II are registered trademarks of Intel Corporation.
Hiperface is a registered trademark of Stegmann Inc.
UL and C-UL are registered trademarks of Underwriters Laboratories.
SERCOS interface is a trademark of the Interests Group SERCOS interface e.V. (IGS)