GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

Motion Control Accessories 8-47
Bulkhead Connector Dimensions
The following tables show dimensions for 1326-CCUx-Ex, 1326-CPB1x-Ex, and 1326-CPC1x-Ex cables. For
installation instructions refer to Bulkhead Connection for Series B 1326 Cable Installation Instructions
(publication 1326A-5.25).
1326 Cable Screw Threads mm (in) A mm (in) B mm (in) C mm (in) D mm (in) E mm (in)
1326-CCU-E-xxx
1326-CCUT-E-xxx
1326-CCUT-EE-xxx
1326-CCU-EL-xxx
1326-CCUT-EL-xxx
4/40 (3/8) 28.58 (1.13) 3.35 (0.13) 26.975 (1.062) 30.16 (1.19) 35.05 (1.38)
1326-CPB1-E-xxx
1326-CPB1T-E-xxx
1326-CPB1T-EE-xxx
1326-CPB1-EL-xxx
1326-CPB1T-EL-xxx
1326-CPC1-E-xxx
1326-CPC1T-E-xxx
1326-CPC1T-EE-xxx
1326-CPC1-EL-xxx
1326-CPC1T-EL-xxx
4/40 (3/8) 34.93 (1.38) 3.35 (0.13) 31.75 (1.25) 36.51 (1.44) 41.15 (1.62)
6/32 (3/8) 43.64 (1.72) 3.81 (0.15) 39.67 (1.56) 45.23 (1.78) 50.80 (2.0)
Figure 8.54
Bulkhead Connector Mounting Hole Dimensions
Diameter of connector opening
A
Distance between
centers of mounting
holes
B
C
Diameter of mounting holes
Wall surface
Figure 8.55
Bulkhead Connector Dimensions
22.86 mm
(0.9 in.)
AB
ALLEN-BRADLEY
D
E
Wall opening for
diameter of
connector
AB ALLEN-BRADLEY
Maximum width of
cabinet wall
4.623 mm (0.182 in.)
Publication GMC-SG001E-EN-P — June 2001