GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

Motion Control Accessories 8-11
Control Interface Cables
2090- U3 xx - D44 xx
Length
01 = 1 m (3.3 ft.) 1 , 03 = 3 m (9.9 ft) 2 , 09 = 9 m (29.5 ft) 3 , 15 = 15 m (49.2 ft) 4 , and 30 = 30 m (98.4 ft) 5
Connector Type
D44 = 44-pin, D-Shell for control interface
Host
CC = Controller cable
1
AE = ControlLogix 1756-M02AE Card Encoder Cable
Tolerance is +10/-0 cm (+25.4/-0 in.).
2 Tolerance is +15/-0 cm (+38.1/-0 in.).
Drive
3 Tolerance is +30/-0 cm (+76.2/-0 in.).
U3 = Ultra3000
4 Tolerance is +45/-0 cm (+114.3/-0 in.).
Bulletin Number for Accessories and Options
5 Tolerance is +60/-0 cm (+152.4/-0 in.).
SERCOS Interface Fiber-Optic Cables
2090 - S C x x x
Length
0-3 = 0.3 m (11.8 in.)
1-0 = 1 m (3.2 ft)
3-0 = 3 m (9.8 ft)
5-0 = 5 m (16.4 ft)
8-0 = 8 m (26.2 ft)
10-0 = 10 m (32.8 ft)
15-0 = 15 m (4 in.)
20-0 = 20 m (65.5 ft)
25-0 = 25 m (82 ft)
32-0 = 32 m (105 ft)
50-0 = 50 m (164.2 ft)
100-0 = 100 m (328.3 ft)
150-0 = 150 m (492.5 ft)
200-0 = 200 m (656.7 ft)
Cable Option
P = Plastic (available in lengths of 32 m (105 ft) or less)
G = Glass (not available in bulk)
Enclosure Option
E = Enclosure Only
V = PVC jacket
N = Nylon jacket
Connector Option
C = Mating Connectors (at both ends)
Type
S = SERCOS interface
Bulletin Number for Accessories and Options
Note: Lengths of 1 m (3.2 ft) to 32 m (105 ft) are available in plastic or glass. Lengths of 50 m (164.2 ft) to 200 m (656.7 ft) are available in glass only.
Note: The configuration options are limited to the following combinations: -SCEP, -SCVP, -SCNP, and -SCVG.
Publication GMC-SG001E-EN-P — June 2001