GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

DANGER
RISK OF ELECTRICAL SHOCK. HIGH VOLTAGE MAY
EXIST UP TO FIVE MINUTES AFTER REMOVING POWER.
DANGER
RISK OF ELECTRICAL SHOCK. HIGH VOLTAGE MAY
EXIST UP TO FIVE MINUTES AFTER REMOVING POWER.
AB
AB
AB
AB
ALLEN-BRADLEY
ALLEN-BRADLEY
AB
AB
ALLEN-BRADLEY
ALLEN-BRADLEY
AB
AB
Motion Control Accessories 8-51
CE-Compliant In-Line Connection
This solution allows for a quick connect or disconnect at the cabinet wall while meeting CE requirements.
Link bulkhead and double-ended cables to create an interconnect in a single cable run.
Figure 8.59
Bulkhead and Double-Ended Connector Cables
1394
Optional mounting
through conductive
(metal) wall
1326-CCUx -D (feedback)
BRADLEY
ALLEN BRADLEY
AB
BRADLEY
ALLEN BRADLEY
AB
1326-CCUx -E (feedback)
1326-CPB1-E /-CPC1-E
(power)
1326-CPB1-D /-CPC1-D
(power)
Maximum width
4.6 m (0.2 in.)
1326Ax Servo Motor (460V)
IMPORTANT
To avoid control performance problems ensure the overall length of cable
combinations (system/axis module to motor) does not exceed 90 m (295.5 ft).
Remote In-Line Connection
This solution provides a connection outside of a cabinet that uses flex and nonflex cables together for cost
reduction.
Figure 8.60
Remote Bulkhead Connection
1394
Bracket mount
(not provided)
1326-CCUx -D (feedback)
BRADLEY
ALLEN BRADLEY
AB
BRADLEY
ALLEN BRADLEY
AB
1326-CPB1-E /-CPC1-E
(power)
1326-CPB1-D /-CPC1-D
(power)
1326-CCUx -E (feedback)
Maximum width
4.6 mm (0.2 in.)
1326Ax Servo Motors (460V)
IMPORTANT
To avoid control performance problems ensure the overall length of cable
combinations (system/axis module to motor) does not exceed 90 m (295.5 ft).
Publication GMC-SG001E-EN-P — June 2001