GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

Motion Control Accessories 8-63
1326AB Motion Junction Box Dimensions
Figure 8.65
1326AB Servo Motor Junction Box Dimensions (1326AB-MOD-RJxx1)
Junction box mounted
away the motor shaft
C
Top Cover Plate
and Gasket
P
Quick Disconnect
(Bayonet Release)
Side Cover Plate
and Gasket
Gasket
N
Kit
1326AB-MOD-
C
mm (in.)
P
mm (in.)
N
mm (in.)
RJAB1 63.5 (2.5) 105 (4.13) 62 (2.44)
RJC1 66.675 (2.625) 120.65 (4.75) 66.675 (2.625)
1326AB Series Motor Junction Box Catalog Number
Catalog numbers consist of various characters, each of which identifies a specific version or option for that
component. Use the catalog numbering chart below to understand the configuration of your motor
junction box kit. For questions regarding product availability, contact your Allen-Bradley distributor.
1326AB - MOD - RJxxx
Junction Box Kit Option
RJAB1 = Kit for all B4 and B5 series motors
RJC1 = Kit for all B7 series motors
Modification Kit
Bulletin Number
Note: The motor comes standard with IP65 plug style connectors mounted radially to the motor. This kit allows the connectors to be
brought out axially to the motor without further wiring. Kit includes a motor junction box and mounting hardware.
Note: Do not use this kit with the high resolution encoder option. Instead, use the right angle connector cable option.
Publication GMC-SG001E-EN-P — June 2001