GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

1394 Drive System Family 4-5
1394 System Module Dimensions
The following section contains the system module dimensions for the 1394, 1394 SERCOS interface,
9/440, and CNC interface systems.
GMC, Analog, SERCOS, 9/440, and CNC Interface
Figure 4.2
1394 System Module Dimensions (1394x-SJT05, 1394x-SJT10, 1394x-SJT22 - for all systems except GMC Turbo)
150 (5.91)
Dimensions are in millimeters and (inches).
26
(1.02)
91.0 (3.58)
50 25
(1.97) (0.98)
8 (0.32)
280
(11.02)
400
(15.75)
385
(15.16)
Fastener
Location 1
Side View (22 kW)
350
(13.78)
Status
DANGER
RISK OF ELECTRICAL SHOCK. HIGH VOLTAGE MAY
EXIST UP TO FIVE MINUTES AFTER REMOVING POWER.
8 (0.31)
50
(1.97)
Mounting Hole Detail
Feedback Cable Clamps
67.31
(2.65)
10.1 (0.4)
Side View (5 and 10 kW)
15.9 (0.63)
8 (0.31)
Feedback Cable Clamps
57.15
(2.25)
12 (0.47)
All slots accept M6 or 1/4-20 Mtg. screws.
1 Dimension shown is for mounting hardware location and
does not reflect the location of the lower slot radius.
Publication GMC-SG001E-EN-P — June 2001