GMC-SG001E-EN-P-JUN01 Motion Control Selection Guide

DANGER
RISK OF ELECTRICAL SHOCK. HIGH VOLTAGE MAY
EXIST UP TO FIVE MINUTES AFTER REMOVING POWER.
DANGER
RISK OF ELECTRICAL SHOCK. HIGH VOLTAGE MAY
EXIST UP TO FIVE MINUTES AFTER REMOVING POWER.
AB
AB
AB
AB
ALLEN-BRADLEY
ALLEN-BRADLEY
ALLEN-BRADLEY
ALLEN-BRADLEY
AB
AB
AB
AB
8-52 Motion Control Accessories
Harsh Environment Connection
Use the IP67 cable (with the -L option) with an L motor for harsh environments.
Figure 8.61
Harsh Environment Connection
1326-CCUx- x L-xxx (resolver feedback) or
1326-CECUx- x L-xxx (high resolution feedback)
1394
AB
ALLEN BRADLEY
AB
ALLEN BRADLEY
1326-CPB1x- L-xxx /-CPC1x- L-xxx (power)
1326Ax-xxxx-21-xx L
IP67 Servo Motor (460V)
Double-Ended Bulkhead In-Line Connection
This solution combines flex and nonflex cables for a single run. Shown below are two disconnects in a
single cable run with a double-ended bulkhead, a double-ended standard, and a standard cable.
Figure 8.62
Standard, Double-Ended Bulkhead, and Double-Ended Cable for In-Line Connection to Flex Track
1394
1326-CCU-xx (feedback)
1326-CCUT-EE (flex feedback)
1326-CPB1-xx /-CPC1-xx (power)
Brackets
(not provided)
Maximum width
4.6 mm (0.2 in.)
1326-CPB1T-EE /-CPC1T-EE (flex power)
Power Track
(not provided)
1326-CPB1-D /-CPC1-D (power)
AB
ALLEN BRADLEY
AB
ALLEN BRADLEY
1326-CCU-D (feedback)
1326Ax Servo Motors (460V)
IMPORTANT
To avoid control performance problems ensure the overall length of cable
combinations (system/axis module to motor) does not exceed 90 m (295.5 ft).
Publication GMC-SG001E-EN-P — June 2001