9600 Service Manual - gmecorp-usa.com

Error Messages During Operation (Cont.)
MESSAGE DESCRIPTION
HV INVERTER ON High voltage was detected when it should have been off,
resulting in system shutdown.
KV ON IN ERROR KV was sensed without an X-ray requested. This indicates
a fault with the High Voltage Generator and shuts down
the system.
MA ON IN ERROR MA was sensed without an X-ray requested. This indicates
a fault with the High Voltage Generator and shuts down
the system.
STATOR NOT ON The stator is not rotating. Operation of the system without
the stator rotating would be destructive to the Tube.
OVERLOAD
FAULT
SATURATION
FAULT
INTERLOCKS
OPEN
OVERVOLTAGE
FAULT
Results in automatic shutdown.
Indicates a fault in the high voltage regulator circuit and
results in automatic shutdown. See also
kV Generator.
Indicates a high voltage regulator fault and results in
automatic shutdown. See also kV Generator.
The interlock circuit has been broken. This could be due
to a fault sensed by software or a direct hardware failure.
Results in automatic shutdown.
A high voltage regulation failure was detected. Results in
automatic shutdown. (This fault occurs at about 140 kVp to
protect X-ray cables, high voltage power supply, and X-ray
Tube.) See Also kV Generator.