9600 Service Manual - gmecorp-usa.com

Workstation Software 5
SYSTEM MEMORY TESTS
This screen appears, and memory tests similar to the following, begin automatically
when "System Memory Tests" is selected from the System Diagnostics Menu.
If failures occur, the program will stop at the point of failure and an error message will
display the address of the bad memory location. Press ENTER to continue memory
tests from that point.
SYSTEM MEMORY TESTS
AT Base Memory PASSED
AT Extended Memory TESTING
(error messages appear here when failures occur)
Press [ENTER] to Continue
Press [ESC] to Exit
Press [F2] to Repeat
IMAGE PROCESSOR TESTS
These Image Processor Tests begin automatically when this test option is selected from
the System Diagnostics Menu.
If test failures occur, the program will halt at the point of failure and display an error
message. Press ENTER to continue testing from that point.
IMAGE PROCESSOR MEMORY TESTS
Image Memory PASSED
Left Filter RAM PASSED
Right Filter RAM PASSED
Left Bit Planes FAILED
Right Bit Planes PASSED
Left LUT TESTING
Right LUT
(error messages appear here when failures occur)
Press [ENTER] to Continue
Press [ESC] to Exit
Press [F2] to Repeat