9600 Service Manual - gmecorp-usa.com

20 Mechanical Assemblies
GENERAL STEERING TEST
1. Select the LOCK mode by pressing the rear of the steering pedal down.
Verify that the casters and wheels are locked in position and do not move. If
the casters and wheels do not lock into position, refer to the Repair
Replacement section.
2. Select the FREE steering mode by pressing the front of the steering pedal
down until the pedal is level with the floor. Verify that the casters move freely
in any direction.
3. To select the STEER forward mode push the Mobile C-Arm forward until the
rear casters have aligned themselves with the forward movement of the C-
Arm. Now press the front of the steering pedal down and continue to push
the Mobile C-Arm forward. The rear casters will lock in place in this position.
4. To select the STEER lateral mode, push the Mobile C-Arm sideways, until
the rear casters have aligned themselves with the sideways movement of
the C-Arm. Now press the front of the steering pedal down and continue to
push the Mobile C-Arm sideways. The rear casters will lock in place in this
position.