9600 Service Manual - gmecorp-usa.com

42 System Overview
CIRCUIT BOARD FUNCTIONS
MOBILE C-ARM
Control Panel Processor PCB
Sch. #00-875601 - Asy. #00-875603 - S/N 69-0001 thru 69-2000
Sch. #00-878486 - Asy. #00-878488 - S/N 69-2001 and up
Interfaces left and right control panels
Interfaces X-ray switch and Fast Stop switches to system
Drives LEDs on control panels
Drives left and right fluorescent displays
Control Panel Processor I/O PCB
Sch. #00-878489 - Asy. #00-878491 - S/N 69-2001 and up
Connection point for new Control Panel Processor PCB (Asy. #00-878488)
Column I/O PCB
Sch. #00-878492 - Asy. #00-878494 - S/N 69-2001 and up
Cabling connection point - no active circuitry
Technique Processor PCB
Sch. #00-876735 - Asy. #00-876737 - S/N 69-0001 thru 69-1000
Sch. #00-877742 - Asy. #00-877744 - S/N 69-1001 and up
Controls C-Arm
Loads and runs DOS and Applications Software from Solid State Disk Drive
Serial communications to C-Arm and Workstation Control Panel Processor and
Image Function PCB
Analog Interface PCB
Sch. #00-876738 - Asy. #00-876740 - All S/N
“Slave” to Technique Processor PCB
Analog to digital conversion
Digital to Analog conversion
PIO control outputs and status inputs
Counter/timer circuitry for generator drive signals
Mainframe Motherboard
Sch. #00-875539 - Asy. #00-900588 - S/N 69-0001 thru 69-2000
Sch. #00-878396 - Asy. #00-900970 - S/N 69-2001 and up
Backplane of generator cardrack
Power and signal interconnection and distribution