9600 Service Manual - gmecorp-usa.com

Status Mode
The Status Mode is used to analyze various system parameters such as
battery condition, heat status of the X-ray tube, A/D and PIO status of the
Analog Interface PCB, and examine the event history of the system. Use the
instructions listed below to enter the STATUS mode. Once in the STATUS mode, the
various system parameters can be examined as desired.
Entering the Status Mode
1. Press and hold the C-Arm Mode button on the Control Panel for five seconds. The
message LOADING STATUS will appear on the Control Panel display.
2. The message STATUS V 1.5 indicates that you have entered the status mode.
Once in this mode, press either the kV or mA controls to scroll through the status
menus.
3. When the desired menu title appears on the Control Panel display, select it by
pressing any key on the Control Panel.
4. Scroll through the choices listed within this menu by pressing the kV or mA control.
5. To read the information or value contained under a menu item, display the item
name and press any Control Panel key.
6. To return to the first level of status menus, scroll to the message EXIT THIS MENU
and press any Control Panel key.
7. To exit the status menu mode and return to normal operation, scroll to the message
EXIT TO SYSTEM and press any Control Panel key. When returning to normal
system operation the Control Panel will display the message LOADING SYSTEM.